Turn Locator's Indicator Light Off in Tracking Mode

According to the default settings, Locators will show a static blue light when in tracking mode. However, this is impractical for some use cases, such as those that require complete darkness or in environments where lights on the ceiling might be distracting. For these cases, it is possible to turn the indicator light off in the tracking mode for Generation Q Locators.
Note:
The Locator indicator light will only be switched off while it is in tracking mode. The Locator will continue to indicate other states with the inbuilt LED.

This feature is only available for Generation Q Locators.

To turn the Locator's indicator light off during tracking mode, follow the steps below.

  1. Open your project in the QSP.
  2. In the QSP object tree on the left, select the Locator or Locators that you want.
  3. Change the indicator light settings by following the steps below. Note that the panel for editing a single Locator is a bit different from editing multiple Locators:
    1. To edit a single Locator, go to the Config tab in the panel on the right and find the LED mode in tracking mode setting. Select Off from the drop-down menu.

    2. To edit multiple Locators, go to the Config tab in the panel on the right and find the Set LED mode setting. Select Off from the drop-down menu and click the Set LED mode button to save the changes.

  4. If your Locator is in tracking mode, the indicator light should now be switched off.