Set Coordinate System Height

To optimise Quuppa system performance for multi-floor deployments (e.g. a Smart Building), it is important to set the absolute height of each coordinate system. It is also important that the floor maps are aligned accurately on top each other and that they share the same coordinate system origin.

  1. Open the project in the QSP.
  2. In the object tree on the left, select the project file.

  3. In the panel on the right, select Coordinate Systems tab.
  4. Input the absolute height of each coordinate system

    Typically it makes sense to set the ground floor height to 0 meters and it serves as a reference to the other floors. In the example above, GroundFloor floor level is set to 0 m. Floor level on Floor1 is set to be 3 m above the GroundFloor, and the floor level on Floor2 is 6 m above the floor level on the GroundFloor.